2013-2015 Land Cruiser Prado · Service Manual Engine / Hybrid System

INSPECTION

Inspection · Vehicles built from Aug 2013


INSPECT DIESEL THROTTLE BODY

  1. Inspect the throttle control motor.

    1. A132685E01
      Measure the resistance according to the value(s) in the table below.

      Standard Resistance:
      Tester Connection
      Condition
      Specified Condition
      1 - 2
      20°C (68°F)
      18 to 22 Ω
      2 - 3
      20°C (68°F)
      18 to 22 Ω
      4 - 5
      20°C (68°F)
      18 to 22 Ω
      5 - 6
      20°C (68°F)
      18 to 22 Ω

      Text in Illustration 
      *a
      Component without harness connected
      (Diesel Throttle Body)
      If the result is not as specified, replace the diesel throttle body.

  1. Inspect the throttle open switch.

    1. A132686E01
      Measure the resistance according to the value(s) in the table below.

      Standard Resistance:
      Tester Connection
      Condition
      Specified Condition
      1 - 2
      Fully open
      Below 1 Ω
      1 - 2
      Fully close
      10 kΩ or higher

      Text in Illustration 
      *a
      Component without harness connected
      (Diesel Throttle Body)
      If the result is not as specified, replace the diesel throttle body.

← REMOVAL (from Aug 2013)INSTALLATION (from Aug 2013) →