TERMINALS OF ECU
System information · Vehicles built Aug 2013 – Jul 2014
Versions by build date: Aug 2013 – Jul 2014 from Aug 2014
| CHECK DRIVER SIDE JUNCTION BLOCK ASSEMBLY AND MAIN BODY ECU (MULTIPLEX NETWORK BODY ECU) |


Remove the main body ECU (multiplex network body ECU) (Click here).
Measure the voltage and resistance according to the value(s) in the table below.
- HINT:
- Measure the values on the wire harness side with the connector disconnected.
If the result is not as specified, there may be a malfunction in the wire harness.Terminal No. (Symbol)
Wiring Color
Terminal Description
Condition
Specified Condition
A-30 (BECU) - Body ground
-
Auxiliary battery power supply
Ignition switch off
11 to 14 V
A-31 (ALTB) - Body ground
-
Auxiliary battery power supply
Ignition switch off
11 to 14 V
A-32 (IG) - Body ground
-
Ignition switch power supply
Ignition switch ON
11 to 14 V
A-32 (IG) - Body ground
-
Ignition switch power supply
Ignition switch off
Below 1 V
A-29 (ACC) - Body ground
-
ACC power supply
Ignition switch ACC
11 to 14 V
A-29 (ACC) - Body ground
-
ACC power supply
Ignition switch off
Below 1 V
A-11 (GND1) - Body ground
-
Ground
Always
Below 1 Ω
G63-3 (GND2) - Body ground
W-B - Body ground
Ground
Always
Below 1 Ω
Install the main body ECU (multiplex network body ECU).
Measure the voltage according to the value(s) in the table below.
Terminal No. (Symbol)
Wiring Color
Terminal Description
Condition
Specified Condition
G63-17 (GOSW) - Body ground
LG - Body ground
Glass hatch opener switch input
Glass hatch open
Below 1 V
G63-17 (GOSW) - Body ground
LG - Body ground
Glass hatch opener switch input
Ignition switch off, all doors closed and glass hatch closed
Pulse generation (See waveform 1 or 2)
2I-9 (GHRY) - Body ground*1
B - Body ground
Glass hatch opener relay output
Ignition switch ON, glass hatch opener switch off
Below 1 V
2I-9 (GHRY) - Body ground*1
B - Body ground
Glass hatch opener relay output
Ignition switch ON, glass hatch opener switch on
11 to 14 V
2H-9 (GHRY) - Body ground*2
B - Body ground
Glass hatch opener relay output
Ignition switch ON, glass hatch opener switch off
Below 1 V
2H-9 (GHRY) - Body ground*2
B - Body ground
Glass hatch opener relay output
Ignition switch ON, glass hatch opener switch on
11 to 14 V
- *1: for LHD
- *2: for RHD
- *1: for LHD
Using an oscilloscope, check waveform 1.

Waveform 1 (Reference) Item
Content
Terminal No. (Symbol)
G63-17 (GOSW) - Body ground
Tool Setting
5 V/DIV., 20 ms/DIV.
Condition
Glass hatch closed
Using an oscilloscope, check waveform 2.

Waveform 2 (Reference) Item
Content
Terminal No. (Symbol)
G63-17 (GOSW) - Body ground
Tool Setting
5 V/DIV., 20 ms/DIV.
Condition
Ignition switch off, all doors closed and glass hatch closed