2013-2015 Land Cruiser Prado · Service Manual Engine / Hybrid System

REMOVAL

Removal / installation · Vehicles built from Aug 2014

Versions by build date: Aug 2013 – Jul 2014 from Aug 2014


1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

NOTICE:
  1. After turning the ignition switch off, waiting time may be required before disconnecting the cable from the battery terminal. Therefore, make sure to read the disconnecting the cable from the battery terminal notice before proceeding with work (Click here).
  2. When disconnecting the cable, some systems need to be initialized after the cable is reconnected (Click here).


2. REMOVE REAR ENGINE UNDER COVER ASSEMBLY
  1. Remove the 4 bolts and rear engine under cover.


3. DISCONNECT CLUTCH RELEASE CYLINDER ASSEMBLY

  1. C215983
    Remove the 2 bolts and disconnect the release cylinder.


4. DISCONNECT CLUTCH FLEXIBLE HOSE BRACKET

  1. A225704
    Remove the bolt and disconnect the clutch flexible hose bracket.


5. REMOVE STARTER ASSEMBLY

  1. A224315
    Disconnect the starter connector.

  1. Remove the terminal cap.

  1. Remove the nut and disconnect the starter wire.

  1. A224316
    Remove the nut, 2 bolts and starter assembly.

← REMOVAL (Aug 2013 – Jul 2014)DISASSEMBLY (from Aug 2013) →