INSPECTION
Inspection · Vehicles built from Aug 2013
| INSPECT CRANKSHAFT POSITION SENSOR |
Measure the resistance according to the value(s) in the table below.

- Standard Resistance:
Tester Connection
Condition
Specified Condition
1 (NE+) - 2 (NE-)
Cold
1630 to 2740 Ω
Hot
2065 to 3225 Ω
Text in Illustration *a
Component without harness connected
(Crankshaft Position Sensor)
- HINT:
- In the table above, the terms "cold" and "hot" refer to the temperature of the sensor. "Cold" means approximately -10 to 50°C (14 to 122°F). "Hot" means approximately 50 to 100°C (122 to 212°F).
