2013-2015 Land Cruiser Prado · Service Manual Brake

C1201 Engine Control System Malfunction

Diagnostic trouble codes · Vehicles built Aug 2013 – Jul 2014

Versions by build date: Aug 2013 – Jul 2014 from Aug 2014

DESCRIPTION

If a malfunction is detected in the engine control system, the ECM sends a malfunction signal to the skid control ECU. The skid control ECU stores this DTC and prohibits the following controls:
  1. VSC
  2. TRC
  3. Downhill assist control
  4. Crawl control
  5. Multi-terrain select control
DTC Code
DTC Detection Condition
Trouble Area
C1201
A malfunction signal is received from the ECM.
Engine control system

INSPECTION PROCEDURE


1. CHECK ENGINE CONTROL SYSTEM
  1. Check if an engine control system DTC is output (for 1GR-FE: Click here, for 1KD-FTV: w/o DPF Click here, w/ DPF Click here).

    Result 
    Result
    Proceed to
    DTC is not output (for 1GR-FE)
    A
    DTC is not output (for 1KD-FTV)
    B
    DTC is output (for 1GR-FE)
    C
    DTC is output (for 1KD-FTV w/o DPF)
    D
    DTC is output (for 1KD-FTV w/ DPF)
    E



B
REPLACE ECM (Click here)

C
GO TO ENGINE CONTROL SYSTEM (DIAGNOSTIC TROUBLE CODE CHART) (Click here)

D
GO TO ENGINE CONTROL SYSTEM (DIAGNOSTIC TROUBLE CODE CHART) (Click here)

E
GO TO ENGINE CONTROL SYSTEM (DIAGNOSTIC TROUBLE CODE CHART) (Click here)
A

REPLACE ECM (Click here)


← C0278 Open in ABS Solenoid Relay Circuit (+ C0279) (from Aug 2014)C1201 Engine Control System Malfunction (from Aug 2014) →