C1201 Engine Control System Malfunction
Diagnostic trouble codes · Vehicles built from Aug 2014
Versions by build date: Aug 2013 – Jul 2014 from Aug 2014
DESCRIPTION
If a malfunction is detected in the engine control system, the ECM sends a malfunction signal to the skid control ECU. The skid control ECU stores this DTC and prohibits the following controls:- VSC
- TRC
- Downhill assist control
- Crawl control
- Multi-terrain select control
| DTC Code |
DTC Detection Condition |
Trouble Area |
| C1201 |
A malfunction signal is received from the ECM. |
Engine control system |
INSPECTION PROCEDURE
| 1. CHECK ENGINE CONTROL SYSTEM |
Check if an engine control system DTC is output (for 1GR-FE: Click here, for 1KD-FTV: w/o DPF Click here, w/ DPF Click here).
Result Result
Proceed to
DTC is not output (for 1GR-FE)
A
DTC is not output (for 1KD-FTV)
B
DTC is output (for 1GR-FE)
C
DTC is output (for 1KD-FTV w/o DPF)
D
DTC is output (for 1KD-FTV w/ DPF)
E
|
|
||||
|
|
||||
|
|
||||
|
|
||||
| A | ||
| ||
