2013-2015 Land Cruiser Prado · Service Manual Brake

C1203 ECM Communication Circuit Malfunction

Diagnostic trouble codes · Vehicles built Aug 2013 – Jul 2014

Versions by build date: Aug 2013 – Jul 2014 from Aug 2014

DESCRIPTION

The circuit is used to send control information from the skid control ECU to the ECM, and engine control information from the ECM to the skid control ECU via the CAN communication system.
DTC Code
DTC Detection Condition
Trouble Area
C1203
The engine/drivetrain specification and/or destination information from the ECM does not match the skid control ECU data.
ECM

INSPECTION PROCEDURE


1. CHECK DTC (ENGINE CONTROL SYSTEM)
  1. Check if an engine control system DTC is output (for 1GR-FE: Click here, for 1KD-FTV: w/o DPF Click here, w/ DPF Click here).

    Result 
    Result
    Proceed to
    DTC is not output (for 1GR-FE)
    A
    DTC is not output (for 1KD-FTV)
    B
    DTC is output (for 1GR-FE)
    C
    DTC is output (for 1KD-FTV w/o DPF)
    D
    DTC is output (for 1KD-FTV w/ DPF)
    E



B
REPLACE ECM (Click here)

C
GO TO ENGINE CONTROL SYSTEM (DIAGNOSTIC TROUBLE CODE CHART) (Click here)

D
GO TO ENGINE CONTROL SYSTEM (DIAGNOSTIC TROUBLE CODE CHART) (Click here)

E
GO TO ENGINE CONTROL SYSTEM (DIAGNOSTIC TROUBLE CODE CHART) (Click here)
A

REPLACE ECM (Click here)


← C1201 Engine Control System Malfunction (from Aug 2014)C1203 ECM Communication Circuit Malfunction (from Aug 2014) →