C1203 ECM Communication Circuit Malfunction
Diagnostic trouble codes · Vehicles built from Aug 2014
Versions by build date: Aug 2013 – Jul 2014 from Aug 2014
DESCRIPTION
The circuit is used to send control information from the skid control ECU to the ECM, and engine control information from the ECM to the skid control ECU via the CAN communication system.| DTC Code |
DTC Detection Condition |
Trouble Area |
| C1203 |
The engine/drivetrain specification and/or destination information from the ECM does not match the skid control ECU data. |
ECM |
INSPECTION PROCEDURE
| 1. CHECK DTC (ENGINE CONTROL SYSTEM) |
Check if an engine control system DTC is output (for 1GR-FE: Click here, for 1KD-FTV: w/o DPF Click here, w/ DPF Click here).
Result Result
Proceed to
DTC is not output (for 1GR-FE)
A
DTC is not output (for 1KD-FTV)
B
DTC is output (for 1GR-FE)
C
DTC is output (for 1KD-FTV w/o DPF)
D
DTC is output (for 1KD-FTV w/ DPF)
E
|
|
||||
|
|
||||
|
|
||||
|
|
||||
| A | ||
| ||
