17 (1) Interior IC Malfunction
Diagnostic trouble codes · Vehicles built from Aug 2014
Versions by build date: Aug 2013 – Jul 2014 from Aug 2014
DESCRIPTION
| DTC No. |
DTC Detection Condition |
Trouble Area |
| 17 (1) |
ECU malfunction. |
ECM |
INSPECTION PROCEDURE
- HINT:
- Read freeze frame data using the intelligent tester. Freeze frame data records the engine condition when malfunctions are detected. When troubleshooting, freeze frame data can help determine if the vehicle was moving or stationary, if the engine was warmed up or not, and other data from the time the malfunction occurred.
| 1. CHECK DTC OUTPUT (CHECK IF DTC 17 (1) IS OUTPUT AGAIN) |
Connect the intelligent tester to the DLC3.
Clear the DTC (Click here).
Turn the ignition switch off for 30 seconds or more.
Turn the ignition switch to ON and turn the tester on.
Enter the following menus: Powertrain / Engine and ECT / DTC.
Read the DTCs (Click here).
Result Result
Proceed to
DTC 17 (1) output again
A
No DTC output
B
|
|
||||
| A | ||
| ||
