INSPECTION
Inspection · Vehicles built from Aug 2013
| INSPECT COMPRESSOR AND MAGNETIC CLUTCH |
Check the operation.
Start the engine.
Inspect the compressor pulley.
- OK:
- Compressor shaft rotates along with pulley.
Inspect the cooler compressor.

Disconnect the connector.
Apply battery voltage to the clutch and check operation of the clutch.
- OK:
Measurement Condition
Specified Condition
Battery positive (+) → Terminal 1
Battery negative (-) → Body ground
Magnet clutch is the engaged
Text in Illustration *1
Magnet Clutch Rotor
*2
Magnet Clutch Hub
*a
Component without harness connected
(Magnet Clutch Assembly)
