2013-2015 Land Cruiser Prado · Service Manual Suspension

INSPECTION

Inspection · Vehicles built from Aug 2013


INSPECT FRONT STABILIZER LINK ASSEMBLY LH

  1. G021679
    As shown in the illustration, flip the ball joint stud back and forth 5 times.

  1. Using a torque wrench, turn the nut continuously at a rate of 3 to 5 seconds per turn and take a torque reading on the 5th turn.

    Standard turning torque:
    0.05 to 1.96 N*m (0.51 to 20 kgf*cm, 0.44 to 17.3 in.*lbf) or less

  1. Check for cracks and grease leaks on the ball joint dust cover.

← REMOVAL (from Aug 2013)INSTALLATION (from Aug 2013) →