Speaker Circuit
Circuit diagnosis · Vehicles built Aug 2013 – Jul 2014
Versions by build date: Aug 2013 – Jul 2014 from Aug 2014
DESCRIPTION
- *1: for 6 Speakers
- *2: for 9 Speakers
If there is a short in a speaker circuit, the radio and display receiver assembly*1 or stereo component amplifier assembly*2 detects it and stops output to the speakers.
Thus sound cannot be heard from the speakers even if there is not a malfunction in the radio and display receiver assembly*1 or stereo component amplifier assembly*2 or speakers.
WIRING DIAGRAM




INSPECTION PROCEDURE
| 1. CHECK VEHICLE CONDITION (SPEAKER TYPE) |
Check the vehicle condition.
Result Result
Proceed to
for 6 Speakers
A
for 9 Speakers
B
|
|
||||
| A | |
| 2. CHECK HARNESS AND CONNECTOR (SPEAKER CIRCUIT) |
- *1: for RH Side
- *2: for LH Side
Disconnect the H48 and H49 radio and display receiver assembly connectors.
Disconnect the J4*1 and/or K3*2 front No. 1 speaker assembly connector.
Disconnect the H34*1 and/or H35*2 front No. 2 speaker assembly connector.
for 3 Door:Disconnect the Q32*1 and/or R37*2 rear speaker set connector.
for 5 Door:Disconnect the L1*1 and/or M1*2 rear speaker set connector.
- Standard Resistance:
for 3 Door (RH Side) Tester Connection
Condition
Specified Condition
H49-1 (FR+) - H34-3 (TWR+)
Always
Below 1 Ω
H49-5 (FR-) - H34-1 (TWR-)
Always
Below 1 Ω
H34-4 (+) - J4-1
Always
Below 1 Ω
H34-2 (-) - J4-2
Always
Below 1 Ω
H48-1 (RR+) - Q32-1
Always
Below 1 Ω
H48-3 (RR-) - Q32-2
Always
Below 1 Ω
H49-1 (FR+) - Body ground
Always
10 kΩ or higher
H49-5 (FR-) - Body ground
Always
10 kΩ or higher
H34-4 (+) - Body ground
Always
10 kΩ or higher
H34-2 (-) - Body ground
Always
10 kΩ or higher
H48-1 (RR+) - Body ground
Always
10 kΩ or higher
H48-3 (RR-) - Body ground
Always
10 kΩ or higher
for 3 Door (LH Side) Tester Connection
Condition
Specified Condition
H49-2 (FL+) - H35-3 (TWL+)
Always
Below 1 Ω
H49-6 (FL-) - H35-1 (TWL-)
Always
Below 1 Ω
H35-4 (+) - K3-1
Always
Below 1 Ω
H35-2 (-) - K3-2
Always
Below 1 Ω
H48-2 (RL+) - R37-1
Always
Below 1 Ω
H48-6 (RL-) - R37-2
Always
Below 1 Ω
H49-2 (FL+) - Body ground
Always
10 kΩ or higher
H49-6 (FL-) - Body ground
Always
10 kΩ or higher
H35-4 (+) - Body ground*2
Always
10 kΩ or higher
H35-2 (-) - Body ground*2
Always
10 kΩ or higher
H48-2 (RL+) - Body ground
Always
10 kΩ or higher
H48-6 (RL-) - Body ground
Always
10 kΩ or higher
for 5 Door (RH Side) Tester Connection
Condition
Specified Condition
H49-1 (FR+) - H34-3 (TWR+)
Always
Below 1 Ω
H49-5 (FR-) - H34-1 (TWR-)
Always
Below 1 Ω
H34-4 (+) - J4-1
Always
Below 1 Ω
H34-2 (-) - J4-2
Always
Below 1 Ω
H48-1 (RR+) - L1-1
Always
Below 1 Ω
H48-3 (RR-) - L1-2
Always
Below 1 Ω
H49-1 (FR+) - Body ground
Always
10 kΩ or higher
H49-5 (FR-) - Body ground
Always
10 kΩ or higher
H34-4 (+) - Body ground
Always
10 kΩ or higher
H34-2 (-) - Body ground
Always
10 kΩ or higher
H48-1 (RR+) - Body ground
Always
10 kΩ or higher
H48-3 (RR-) - Body ground
Always
10 kΩ or higher
for 5 Door (LH Side) Tester Connection
Condition
Specified Condition
H49-2 (FL+) - H35-3 (TWL+)
Always
Below 1 Ω
H49-6 (FL-) - H35-1 (TWL-)
Always
Below 1 Ω
H35-4 (+) - K3-1
Always
Below 1 Ω
H35-2 (-) - K3-2
Always
Below 1 Ω
H48-2 (RL+) - M1-1
Always
Below 1 Ω
H48-6 (RL-) - M1-2
Always
Below 1 Ω
H49-2 (FL+) - Body ground
Always
10 kΩ or higher
H49-6 (FL-) - Body ground
Always
10 kΩ or higher
H35-4 (+) - Body ground*2
Always
10 kΩ or higher
H35-2 (-) - Body ground*2
Always
10 kΩ or higher
H48-2 (RL+) - Body ground
Always
10 kΩ or higher
H48-6 (RL-) - Body ground
Always
10 kΩ or higher
|
|
||||
| OK | |
| 3. INSPECT FRONT NO. 1 SPEAKER ASSEMBLY |
Remove the front No. 1 speaker assembly (Click here).
Inspect the front No. 1 speaker assembly (Click here).
|
|
||||
| OK | |
| 4. CHECK FRONT NO. 2 SPEAKER ASSEMBLY |
Replace the front No. 2 speaker with a known good one (Click here).
Check that the malfunction disappears.
- HINT:
- Connect all the connectors that were disconnected from the front No. 2 speaker assemblies.
- When there is a possibility that either the right or left front speaker is defective, inspect by interchanging the right one with the left one.
- Perform the above inspection on both LH and RH sides.
- Connect all the connectors that were disconnected from the front No. 2 speaker assemblies.
- OK:
- Malfunction disappears.
|
|
||||
| OK | ||
| ||
| 5. INSPECT REAR SPEAKER SET |
Remove the rear speaker set.
- for 3 Door: Click here
- for 5 Door: Click here
- for 3 Door: Click here
Inspect the rear speaker set.
- for 3 Door: Click here
- for 5 Door: Click here
- for 3 Door: Click here
| Result |
Proceed to |
| OK |
A |
| NG (for 3 Door) |
B |
| NG (for 5 Door) |
C |
|
|
||||
|
|
||||
| A | ||
| ||
| 6. CHECK HARNESS AND CONNECTOR (SPEAKER CIRCUIT) |
- *1: for RH Side
- *2: for LH Side
Disconnect the H67 stereo component amplifier assembly connector.
Disconnect the J4*1 and/or K3*2 front No. 1 speaker assembly connector.
Disconnect the H10*1 and/or H13*2 front No. 2 speaker assembly connector.
Disconnect the H21*1 and/or H22*2 front No. 3 speaker assembly connector.
Disconnect the H14 front No. 4 speaker assembly connector.
for 3 Door:Disconnect the Q32*1 and/or R37*2 rear speaker set connector.
for 5 Door:Disconnect the L1*1 and/or M1*2 rear speaker set connector.
- Standard Resistance:
for Front No. 4 Speaker Assembly Tester Connection
Condition
Specified Condition
H67-7 (CTR+) - H14-2
Always
Below 1 Ω
H67-22 (CTR-) - H14-1
Always
Below 1 Ω
H67-7 (CTR+) - Body ground
Always
10 kΩ or higher
H67-22 (CTR-) - Body ground
Always
10 kΩ or higher
for 3 Door (RH Side) Tester Connection
Condition
Specified Condition
H67-5 (WFR+) - J4-1
Always
Below 1 Ω
H67-20 (WFR-) - J4-2
Always
Below 1 Ω
H67-13 (FR+) - H21-1 (TWR+)
Always
Below 1 Ω
H67-28 (FR-) - H21-2 (TWR-)
Always
Below 1 Ω
H21-3 (+) - H10-2
Always
Below 1 Ω
H21-4 (-) - H10-1
Always
Below 1 Ω
H67-15 (RR+) - Q32-1
Always
Below 1 Ω
H67-30 (RR-) - Q32-2
Always
Below 1 Ω
H67-5 (WFR+) - Body ground
Always
10 kΩ or higher
H67-20 (WFR-) - Body ground
Always
10 kΩ or higher
H67-13 (FR+) - Body ground
Always
10 kΩ or higher
H67-28 (FR-) - Body ground
Always
10 kΩ or higher
H21-3 (+) - Body ground
Always
10 kΩ or higher
H21-4 (-) - Body ground
Always
10 kΩ or higher
H67-15 (RR+) - Body ground
Always
10 kΩ or higher
H67-30 (RR-) - Body ground
Always
10 kΩ or higher
for 3 Door (LH Side) Tester Connection
Condition
Specified Condition
H67-4 (WFL+) - K3-1
Always
Below 1 Ω
H67-19 (WFL-) - K3-2
Always
Below 1 Ω
H67-12 (FL+) - H22-1 (TWL+)
Always
Below 1 Ω
H67-27 (FL-) - H22-2 (TWL-)
Always
Below 1 Ω
H22-3 (+) - H13-2
Always
Below 1 Ω
H22-4 (-) - H13-1
Always
Below 1 Ω
H67-14 (RL+) - R37-1
Always
Below 1 Ω
H67-29 (RL-) - R37-2
Always
Below 1 Ω
H67-4 (WFL+) - Body ground
Always
10 kΩ or higher
H67-19 (WFL-) - Body ground
Always
10 kΩ or higher
H67-12 (FL+) - Body ground
Always
10 kΩ or higher
H67-27 (FL-) - Body ground
Always
10 kΩ or higher
H22-3 (+) - Body ground
Always
10 kΩ or higher
H22-4 (-) - Body ground
Always
10 kΩ or higher
H67-14 (RL+) - Body ground
Always
10 kΩ or higher
H67-29 (RL-) - Body ground
Always
10 kΩ or higher
for 5 Door (RH Side) Tester Connection
Condition
Specified Condition
H67-5 (WFR+) - J4-1
Always
Below 1 Ω
H67-20 (WFR-) - J4-2
Always
Below 1 Ω
H67-13 (FR+) - H21-1 (TWR+)
Always
Below 1 Ω
H67-28 (FR-) - H21-2 (TWR-)
Always
Below 1 Ω
H21-3 (+) - H10-2
Always
Below 1 Ω
H21-4 (-) - H10-1
Always
Below 1 Ω
H67-15 (RR+) - L1-1
Always
Below 1 Ω
H67-30 (RR-) - L1-2
Always
Below 1 Ω
H67-5 (WFR+) - Body ground
Always
10 kΩ or higher
H67-20 (WFR-) - Body ground
Always
10 kΩ or higher
H67-13 (FR+) - Body ground
Always
10 kΩ or higher
H67-28 (FR-) - Body ground
Always
10 kΩ or higher
H21-3 (+) - Body ground
Always
10 kΩ or higher
H21-4 (-) - Body ground
Always
10 kΩ or higher
H67-15 (RR+) - Body ground
Always
10 kΩ or higher
H67-30 (RR-) - Body ground
Always
10 kΩ or higher
for 5 Door (LH Side) Tester Connection
Condition
Specified Condition
H67-4 (WFL+) - K3-1
Always
Below 1 Ω
H67-19 (WFL-) - K3-2
Always
Below 1 Ω
H67-12 (FL+) - H22-1 (TWL+)
Always
Below 1 Ω
H67-27 (FL-) - H22-2 (TWL-)
Always
Below 1 Ω
H22-3 (+) - H13-2
Always
Below 1 Ω
H22-4 (-) - H13-1
Always
Below 1 Ω
H67-14 (RL+) - M1-1
Always
Below 1 Ω
H67-29 (RL-) - M1-2
Always
Below 1 Ω
H67-4 (WFL+) - Body ground
Always
10 kΩ or higher
H67-19 (WFL-) - Body ground
Always
10 kΩ or higher
H67-12 (FL+) - Body ground
Always
10 kΩ or higher
H67-27 (FL-) - Body ground
Always
10 kΩ or higher
H22-3 (+) - Body ground
Always
10 kΩ or higher
H22-4 (-) - Body ground
Always
10 kΩ or higher
H67-14 (RL+) - Body ground
Always
10 kΩ or higher
H67-29 (RL-) - Body ground
Always
10 kΩ or higher
|
|
||||
| OK | |
| 7. INSPECT FRONT NO. 1 SPEAKER ASSEMBLY |
Remove the front No. 1 speaker assembly (Click here).
Inspect the front No. 1 speaker assembly (Click here).
|
|
||||
| OK | |
| 8. CHECK FRONT NO. 2 SPEAKER ASSEMBLY |
Replace the front No. 2 speaker with a known good one (Click here).
Check that the malfunction disappears.
- HINT:
- Connect all the connectors that were disconnected from the front No. 2 speaker assemblies.
- When there is a possibility that either the right or left front speaker is defective, inspect by interchanging the right one with the left one.
- Perform the above inspection on both LH and RH sides.
- Connect all the connectors that were disconnected from the front No. 2 speaker assemblies.
- OK:
- Malfunction disappears.
|
|
||||
| OK | ||
| ||
| 9. CHECK FRONT NO. 4 SPEAKER ASSEMBLY |
Replace the front No. 4 speaker with a known good one (Click here).
Check that the malfunction disappears.
- HINT:
- Connect all the connectors that were disconnected from the front No. 4 speaker assemblies.
- OK:
- Malfunction disappears.
|
|
||||
| OK | ||
| ||
| 10. CHECK FRONT NO. 3 SPEAKER ASSEMBLY |
Replace the front No. 3 speaker with a known good one (Click here).
Check that the malfunction disappears.
- HINT:
- Connect all the connectors that were disconnected from the front No. 3 speaker assemblies.
- When there is a possibility that either the right or left front speaker is defective, inspect by interchanging the right one with the left one.
- Perform the above inspection on both LH and RH sides.
- Connect all the connectors that were disconnected from the front No. 3 speaker assemblies.
- OK:
- Malfunction disappears.
|
|
||||
| OK | ||
| ||
| 11. INSPECT REAR SPEAKER SET |
Remove the rear speaker set.
- for 3 Door: Click here
- for 5 Door: Click here
- for 3 Door: Click here
Inspect the rear speaker set.
- for 3 Door: Click here
- for 5 Door: Click here
- for 3 Door: Click here
| Result |
Proceed to |
| OK |
A |
| NG (for 3 Door) |
B |
| NG (for 5 Door) |
C |
|
|
||||
|
|
||||
| A | ||
| ||
