DIAGNOSTIC TROUBLE CODE CHART
Diagnostic trouble codes · Vehicles built Aug 2013 – Jul 2014
Versions by build date: Aug 2013 – Jul 2014 from Aug 2014
- HINT:
- If a trouble code is output during the DTC check, inspect the trouble areas listed for that code. For details of the code, refer to the "See page" below.
| DTC Code |
Detection Item |
Return-to-normal |
See page |
| C1541 |
Vehicle Speed Signal |
After normal confirmation |
Click here
|
| C1544 |
High Engine Revolution Signal |
After normal confirmation |
Click here
|
| C15F0 |
VFC Solenoid Circuit |
Ignition switch turned to ON again |
Click here
|
| C15F1 |
Steering Angle Sensor Circuit |
After normal confirmation |
Click here
|
| U0100 |
Lost Communication with ECM / PCM "A" |
After CAN communication system returns to normal condition or ignition switch turned to ON again |
Click here
|
| U0126 |
Lost Communication with Steering Angle Sensor Module |
After CAN communication system returns to normal condition or ignition switch turned to ON again |
Click here
|
| U0129 |
Lost Communication with Brake System Control Module |
After CAN communication system returns to normal condition or ignition switch turned to ON again |
Click here
|