2013-2015 Land Cruiser Prado · Service Manual Steering

C15F1 Steering Angle Sensor Circuit

Diagnostic trouble codes · Vehicles built from Aug 2014

Versions by build date: Aug 2013 – Jul 2014 from Aug 2014

DESCRIPTION

The power steering ECU receives steering angle signals from the steering angle sensor via CAN communication. The power steering ECU provides appropriate assisting force in accordance with the steering angle signal.
DTC Code
DTC Detection Condition
Trouble Area
C15F1
An abnormal steering angle signal is received.
  1. Steering angle sensor (Spiral cable sub-assembly)
  2. CAN communication system
  3. Power steering ECU assembly

INSPECTION PROCEDURE


1. CHECK OTHER DTC OUTPUT (CAN COMMUNICATION SYSTEM)
  1. Check if DTC U0126 is output (Click here).

    Result 
    Result
    Proceed to
    DTC U0126 is not output.
    A
    DTC U0126 is output.
    B

    HINT:
    DTC U0126 indicates a CAN communication malfunction in the power steering system.



B
REPAIR CIRCUIT INDICATED BY OUTPUT CODE (Click here)
A


2. CHECK OTHER DTC OUTPUT (BRAKE CONTROL SYSTEM)
  1. Using the GTS, check for DTCs related to the steering angle sensor and confirm that there are no problems in the brake control system (Click here for Hydraulic Brake Booster, Click here for Vacuum Brake Booster).

    Result 
    Result
    Proceed to
    DTC is not output.
    A
    DTC is output.
    for Hydraulic Brake Booster
    B
    for Vacuum Brake Booster
    C



B
GO TO VEHICLE STABILITY CONTROL SYSTEM (DIAGNOSTIC TROUBLE CODE CHART) (Click here)

C
GO TO VEHICLE STABILITY CONTROL SYSTEM (DIAGNOSTIC TROUBLE CODE CHART) (Click here)
A

REPLACE POWER STEERING ECU ASSEMBLY (Click here)


← C15F1 Steering Angle Sensor Circuit (Aug 2013 – Jul 2014)U0100 Lost Communication with ECM / PCM "A" (+ U0126, U0129) (Aug 2013 – Jul 2014) →