REMOVAL
Removal / installation · Vehicles built Aug 2013 – Jul 2014
Versions by build date: Aug 2013 – Jul 2014 from Aug 2014
| 1. REMOVE GENERATOR ASSEMBLY |
Remove the generator (Click here).
| 2. REMOVE COOLER COMPRESSOR ASSEMBLY (w/ Air Conditioning System) |
Remove the cooler compressor (Click here).
| 3. REMOVE NO. 1 ENGINE UNDER COVER SUB-ASSEMBLY |
Remove the 4 bolts.
Unhook the engine under cover from the vehicle body as shown in the illustration.

| 4. REMOVE IDLER PULLEY ASSEMBLY (w/o Air Conditioning System) |
Remove the 3 bolts and idler pulley.
| 5. REMOVE CRANKSHAFT POSITION SENSOR |
Disconnect the sensor connector.

Remove the bolt and sensor.
