2013-2015 Land Cruiser Prado · Service Manual Engine / Hybrid System

REMOVAL

Removal / installation · Vehicles built from Aug 2014

Versions by build date: Aug 2013 – Jul 2014 from Aug 2014


1. REMOVE GENERATOR ASSEMBLY
  1. Remove the generator (Click here).


2. REMOVE COOLER COMPRESSOR ASSEMBLY (w/ Air Conditioning System)
  1. Remove the cooler compressor (Click here).


3. REMOVE NO. 1 ENGINE UNDER COVER SUB-ASSEMBLY
  1. Remove the 4 bolts.

  1. A224743
    Unhook the engine under cover from the vehicle body as shown in the illustration.


4. REMOVE IDLER PULLEY ASSEMBLY (w/o Air Conditioning System)
  1. Remove the 3 bolts and idler pulley.


5. REMOVE CRANKSHAFT POSITION SENSOR

  1. A076417
    Disconnect the sensor connector.

  1. Remove the bolt and sensor.

← REMOVAL (Aug 2013 – Jul 2014)INSPECTION (from Aug 2013) →