2013-2015 Land Cruiser Prado · Service Manual Drivetrain

INSTALLATION

Removal / installation · Vehicles built from Aug 2013


1. INSTALL FRONT PROPELLER SHAFT ASSEMBLY
  1. Align the matchmarks on the yoke and differential flange.

  1. Install the propeller shaft assembly with the 4 washers, 4 bolts and 4 nuts.

    Torque:
    88 N*m{ 899 kgf*cm , 65 ft.*lbf }

  1. Align the matchmarks on the yoke and transfer flange.

  1. Install the propeller shaft assembly with the 4 washers and 4 nuts.

    Torque:
    88 N*m{ 899 kgf*cm , 65 ft.*lbf }


2. INSTALL PROPELLER SHAFT HEAT INSULATOR WITH BRACKET (for 1GR-FE)
  1. Install the propeller shaft heat insulator with bracket with the 2 bolts.

    Torque:
    16 N*m{ 160 kgf*cm , 12 ft.*lbf }


3. INSTALL FRONT EXHAUST PIPE
for 5L-E:
(Click here)
for 1GR-FE:
(Click here)
for 2TR-FE:
(Click here)
for 1KD-FTV (w/ DPF):
(Click here)
for 1KD-FTV (w/o DPF):
(Click here)
← REASSEMBLY (from Aug 2013)COMPONENTS (from Aug 2013) →