2013-2015 Land Cruiser Prado · Service Manual Engine / Hybrid System

INSTALLATION

Removal / installation · Vehicles built from Aug 2013


1. INSTALL ELECTRIC VACUUM REGULATING VALVE ASSEMBLY (for EGR)
  1. Install the electric vacuum regulating valve together with the bracket with the 2 bolts.

    Torque:
    20 N*m{ 204 kgf*cm , 15 ft.*lbf }

  1. A223493E01
    Connect the 4 vacuum hoses.
    Text in Illustration 
    *1
    Yellow Mark
    *2
    Pink Mark

    NOTICE:
    Install the vacuum hoses so that they completely cover the pipes.

  1. Connect the connector.


2. INSTALL GAS FILTER WITH GAS FILTER BRACKET
  1. Install the gas filter with gas filter bracket with the bolt.

    Torque:
    20 N*m{ 204 kgf*cm , 15 ft.*lbf }

  1. Connect the 2 vacuum hoses.

    NOTICE:
    Install the vacuum hoses so that they completely cover the pipes.


3. INSTALL EGR VALVE BRACKET
  1. Install the EGR valve bracket with the 2 nuts.

    Torque:
    8.0 N*m{ 82 kgf*cm , 71 in.*lbf }


4. CONNECT ENGINE WIRE
  1. Attach the clamp and connect the engine wire.

← INSPECTION (from Aug 2013)ON-VEHICLE INSPECTION (from Aug 2013) →