2013-2015 Land Cruiser Prado · Service Manual Audio / Visual / Telematics

SYSTEM DESCRIPTION

Troubleshooting · Vehicles built Aug 2013 – Jul 2014

Versions by build date: Aug 2013 – Jul 2014 from Aug 2014


GENERAL
  1. This system has a rear television camera assembly mounted on the back door to display an image of the area behind the vehicle on the display. The display panel also shows a composite view consisting of the area behind the vehicle and parking guide lines to assist the driver in parking the vehicle by monitoring the area behind the vehicle.

  2. This system consists of the following components:

    1. Rear television camera assembly

    2. Navigation receiver assembly

    3. Spiral cable sub-assembly

    4. Main body ECU (multiplex network body ECU)

    5. Skid control ECU (brake actuator assembly)

    6. Back door courtesy light switch assembly

    7. ECM

  3. This system is equipped with a self-diagnosis system, which is operated from a designated window that appears on the display panel, just as in the navigation system.


FUNCTION OF COMPONENTS
  1. The navigation receiver assembly receives the reverse signal via a CAN communication line when the engine switch is on (IG) and the shift lever is moved to R. After receiving the reverse signal, the navigation receiver assembly switches to the parking assist monitor system.

    Item
    Function
    Rear Television Camera Assembly
    1. Mounted on the back door to transmit an image of the area behind the vehicle to the navigation receiver assembly.
    2. Has a color video camera that uses a Complementary Metal Oxide Semiconductor (CMOS) and a wide-angle lens.
    Navigation Receiver Assembly
    1. Receives video signals, which contain an image of the area behind the vehicle taken with the rear television camera assembly.
    2. Performs overall control of the system by receiving signals from the sensors.
    3. Allows operation via the touch panel of the display when the park assist monitor screen or diagnosis screen is displayed.
    4. Creates images and displays adjustment screens performed on the diagnosis screen.
    5. Stops displaying the guide line and buttons and displays "Check surrounding for safety" when an open signal is received for the luggage compartment door.
    6. Displays "Back door is open" on the back camera position setting screen when an open signal is received for the back door.
    Spiral Cable Sub-assembly
    Detects the angle of the steering wheel and sends the resulting signals to the navigation receiver assembly through CAN communication.
    Skid Control ECU (Brake Actuator Assembly)
    Transmits a vehicle speed signal to the navigation receiver assembly through CAN communication.
    Main Body ECU (Multiplex Network Body ECU)
    Transmits a back door courtesy light switch signal to the navigation receiver assembly through CAN communication.
    Back Door Courtesy Light Switch Assembly
    Transmits a back door courtesy switch signal to the main body ECU (multiplex network body ECU).
    ECM
    Sends the shift position signal to the navigation receiver assembly via CAN communication.


OPERATION EXPLANATION
  1. The navigation receiver assembly receives the reverse signal via a CAN communication line when the engine switch is on (IG) and the shift lever is moved to R. After receiving the reverse signal, the navigation receiver assembly switches to the parking assist monitor system.


DISPLAY MODE SETTING
E280626E01
Text in Illustration 
*a
Display Mode Switch Screen Button
*b
Estimated Course Line Display Mode
*c
Parking Assist Guide Line Display Mode
*d
Distance Guide Line Display Mode
V100135
Display Mode Switch Screen Button Pressed
-
-
  1. While the parking assist monitor is displayed, pressing the display mode switch scree button switches the parking assist monitor display mode.

    Parking Assist Monitor Display Mode 
    Parking assist monitor display mode
    Distance guide lines
    (Red)
    Vehicle width extension guide line
    (Blue)
    Estimated course lines
    (Yellow)
    Parking assist guide lines
    (Blue)
    Estimated Course Line Display Mode
    Displayed
    Displayed
    Displayed
    Not displayed
    Parking Assist Guide Line Display Mode
    Displayed
    Displayed
    Not displayed
    Displayed
    Distance Guide Line Display Mode
    Displayed
    Not displayed
    Not displayed
    Not displayed


DIAGNOSTIC FUNCTION OUTLINE
  1. This parking assist monitor system has a diagnostic function displayed on the navigation receiver assembly. This function enables calibration (adjustment and verification) of the parking assist monitor system (Click here).

  2. The following items for the parking assist monitor system can be checked using the GTS.

    Item
    Proceed to
    DTC
    Click here
    Data List / Active Test
    Click here

← SYSTEM DIAGRAM (from Aug 2013)SYSTEM DESCRIPTION (from Aug 2014) →