2013-2015 Land Cruiser Prado · Service Manual Steering

DISASSEMBLY

Removal / installation · Vehicles built from Aug 2013


1. REMOVE STEERING LOCK ACTUATOR ASSEMBLY
  1. Using a center punch, mark the center of the 2 tapered-head bolts.

  1. Using a 3 to 4 mm (0.118 to 0.157 in.) drill, drill a hole in the 2 bolts.

  1. C215863
    Using a screw extractor, remove the 2 bolts and steering lock actuator assembly from the steering column assembly.


2. REMOVE MULTIPLEX TILT AND TELESCOPIC ECU

  1. C215864
    Disconnect the connector.

  1. Remove the bolt and ECU.

← REMOVAL (from Aug 2014)REASSEMBLY (from Aug 2013) →