REASSEMBLY
Removal / installation · Vehicles built from Aug 2013
| 1. INSTALL MULTIPLEX TILT AND TELESCOPIC ECU |
Install the ECU with the bolt.
- Torque:
- 2.8 N*m{ 28 kgf*cm , 24 in.*lbf }
Connect the connector.
- NOTICE:
- The connectors on both ends of the wire harness between the telescopic motor and ECU are the same shape. When installing them, connect the connectors of the same color.
| 2. INSTALL STEERING LOCK ACTUATOR ASSEMBLY |
Temporarily install the steering lock actuator assembly with 2 new tapered-head bolts.
Tighten the 2 tapered-head bolt until the bolt heads breaks off.

