INSTALLATION
Removal / installation · Vehicles built Aug 2013 – Jul 2014
Versions by build date: Aug 2013 – Jul 2014 from Aug 2014
| 1. INSTALL HOLDER ANTENNA ASSEMBLY (for 5 Door) |
for Diversity:
Install the holder antenna with the bolt as shown in the part of the illustration labeled A.
- Torque:
- 7.0 N*m{ 71 kgf*cm , 62 in.*lbf }
Attach the clamp and install the holder antenna with the bolt as shown in the part of the illustration labeled B.
- Torque:
- 7.5 N*m{ 76 kgf*cm , 66 in.*lbf }
Connect the 3 connectors.


for Non Diversity:
Install the holder antenna with the bolt.
- Torque:
- 7.0 N*m{ 71 kgf*cm , 62 in.*lbf }
Connect the 2 connectors.


| 2. INSTALL HOLDER ANTENNA ASSEMBLY (for 3 Door) |
for Diversity:
Attach the clamp and install the holder antenna with the 2 bolts as shown in the part of the illustration labeled A.
- Torque:
- 8.0 N*m{ 82 kgf*cm , 71 in.*lbf }
Attach the 4 clamps and install the holder antenna with the bolt as shown in the part of the illustration labeled B.
- Torque:
- 7.5 N*m{ 76 kgf*cm , 66 in.*lbf }
Connect the 3 connectors.


for Non Diversity:
Attach the clamp and install the holder antenna with the 2 bolts.
- Torque:
- 8.0 N*m{ 82 kgf*cm , 71 in.*lbf }
Connect the 2 connectors.


| 3. INSTALL ROOF HEADLINING ASSEMBLY |
for 5 Door:
(Click here)
for 3 Door:
(Click here)
| 4. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL |
- NOTICE:
- When disconnecting the cable, some systems need to be initialized after the cable is reconnected (Click here).
