2013-2015 Land Cruiser Prado · Service Manual Audio / Visual / Telematics

INSTALLATION

Removal / installation · Vehicles built from Aug 2014

Versions by build date: Aug 2013 – Jul 2014 from Aug 2014


1. INSTALL HOLDER ANTENNA ASSEMBLY (for 5 Door)

  1. for Diversity:

    1. Install the holder antenna with the bolt as shown in the part of the illustration labeled A.

      Torque:
      7.0 N*m{ 71 kgf*cm , 62 in.*lbf }

    2. Attach the clamp and install the holder antenna with the bolt as shown in the part of the illustration labeled B.

      Torque:
      7.5 N*m{ 76 kgf*cm , 66 in.*lbf }

    3. Connect the 3 connectors.

      B239121E01

  1. for Non Diversity:

    1. Install the holder antenna with the bolt.

      Torque:
      7.0 N*m{ 71 kgf*cm , 62 in.*lbf }

    2. Connect the 2 connectors.

      B239122


2. INSTALL HOLDER ANTENNA ASSEMBLY (for 3 Door)

  1. for Diversity:

    1. Attach the clamp and install the holder antenna with the 2 bolts as shown in the part of the illustration labeled A.

      Torque:
      8.0 N*m{ 82 kgf*cm , 71 in.*lbf }

    2. Attach the 4 clamps and install the holder antenna with the bolt as shown in the part of the illustration labeled B.

      Torque:
      7.5 N*m{ 76 kgf*cm , 66 in.*lbf }

    3. Connect the 3 connectors.

      B239123E01

  1. for Non Diversity:

    1. Attach the clamp and install the holder antenna with the 2 bolts.

      Torque:
      8.0 N*m{ 82 kgf*cm , 71 in.*lbf }

    2. Connect the 2 connectors.

      B239124


3. INSTALL ROOF HEADLINING ASSEMBLY
  1. for 5 Door:
    (Click here)

  1. for 3 Door:
    (Click here)


4. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

NOTICE:
When disconnecting the cable, some systems need to be initialized after the cable is reconnected (Click here).

← INSTALLATION (Aug 2013 – Jul 2014)COMPONENTS (from Aug 2013) →