2013-2015 Land Cruiser Prado · Service Manual Audio / Visual / Telematics

REMOVAL

Removal / installation · Vehicles built from Aug 2014

Versions by build date: Aug 2013 – Jul 2014 from Aug 2014


1. PRECAUTION

NOTICE:
After turning the ignition switch off, waiting time may be required before disconnecting the cable from the battery terminal. Therefore, make sure to read the disconnecting the cable from the battery terminal notice before proceeding with work (Click here).


2. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

NOTICE:
When disconnecting the cable, some systems need to be initialized after the cable is reconnected (Click here).


3. REMOVE ROOF HEADLINING ASSEMBLY
  1. for 5 Door:
    (Click here)

  1. for 3 Door:
    (Click here)


4. REMOVE HOLDER ANTENNA ASSEMBLY (for 5 Door)

  1. for Diversity:

    1. Disconnect the 3 connectors.

    2. Remove the bolt and holder antenna shown in the part of the illustration labeled A.

    3. Detach the clamp and remove the holder antenna shown in the part of the illustration labeled B.

      B239121E01

  1. for Non Diversity:

    1. Disconnect the 2 connectors.

    2. Remove the bolt and holder antenna.

      B239122


5. REMOVE HOLDER ANTENNA ASSEMBLY (for 3 Door)

  1. for Diversity:

    1. Disconnect the 3 connectors.

    2. Detach the clamp and remove the bolt and holder antenna shown in the part of the illustration labeled A.

    3. Detach the 4 clamps and remove the bolt and holder antenna shown in the part of the illustration labeled B.

      B239123E01

  1. for Non Diversity:

    1. Disconnect the 2 connectors.

    2. Detach the clamp and remove the bolt and holder antenna.

      B239124

← REMOVAL (Aug 2013 – Jul 2014)INSTALLATION (Aug 2013 – Jul 2014) →