2013-2015 Land Cruiser Prado · Service Manual Vehicle Interior

INSPECTION

Inspection · Vehicles built from Aug 2013


INSPECT NO. 1 SEAT 3 POINT TYPE BELT ASSEMBLY LH

B242818E01

NOTICE:
Do not disassemble the retractor.

Text in Illustration 
*a
Unlock
*b
Lock
*c
45°
  1. When the inclination of the retractor is 15° or less, check that the belt can be pulled from the retractor. When the inclination of the retractor is over 45°, check that the belt locks.
    If the operation is not as specified, replace the No. 1 seat 3 point type belt assembly LH.

  1. Check the fastening function of the child restraint system.

    NOTICE:
    The check should be performed with the outer belt installed.


    1. When the belt is pulled out fully, the belt should automatically start to retract.

    2. After the belt has fully retracted, the belt should be able to be pulled out and retracted again. If the operation is not as specified, replace the No. 1 seat 3 point type belt assembly LH.

← REMOVAL (from Aug 2013)INSTALLATION (from Aug 2013) →