INSPECTION
Inspection · Vehicles built from Aug 2013
| INSPECT CENTER CLUSTER MODULE SWITCH (REAR DIFFERENTIAL LOCK CONTROL SWITCH) |
Measure the resistance according to the value(s) in the table below.

- Standard Resistance:
Tester Connection
Switch Condition
Specified Condition
24 (E) - 15 (B)
Pressed
Below 1 Ω
Not pressed
10 kΩ or higher
If the result is not as specified, replace the differential lock switch.Text in Illustration *a
Component without harness connected
(Center Cluster Module Switch (Rear Differential Lock Control Switch))
