INSTALLATION
Removal / installation · Vehicles built from Aug 2014
Versions by build date: Aug 2013 – Jul 2014 from Aug 2014
- HINT:
- Use the same procedure for RHD and LHD vehicles.
- The procedure listed below is for LHD vehicles.
- Use the same procedure for RHD and LHD vehicles.
| 1. INSTALL TRIP SWITCH |
Attach the 2 claws to install the trip switch.
| 2. INSTALL INSTRUMENT CLUSTER FINISH PANEL SUB-ASSEMBLY |
Attach the 4 claws, 2 clips and 2 guides to install the instrument cluster finish panel.
| 3. INSTALL LOWER INSTRUMENT PANEL FINISH PANEL ASSEMBLY |
Connect each connector.
Attach the 4 clips to install the instrument panel finish panel.
| 4. INSTALL INSTRUMENT PANEL FINISH PLATE GARNISH (for RHD) |
Connect each connector.
Attach the 4 clips to install the instrument panel finish plate garnish.
| 5. INSTALL INSTRUMENT CLUSTER FINISH PANEL ORNAMENT (for LHD) |
Attach the 3 clips to install the instrument cluster finish panel ornament.
| 6. RESTORE AUTOAWAY/RETURN FUNCTION (for Power Tilt and Power Telescopic Steering Column) |
Restore the Autoaway/Return function setting to the previous condition by changing the customize parameter (Click here).
