2013-2015 Land Cruiser Prado · Service Manual Vehicle Interior

INSTALLATION

Removal / installation · Vehicles built Aug 2013 – Jul 2014

Versions by build date: Aug 2013 – Jul 2014 from Aug 2014

HINT:
  1. Use the same procedure for RHD and LHD vehicles.
  2. The procedure listed below is for LHD vehicles.


1. INSTALL TRIP SWITCH
  1. Attach the 2 claws to install the trip switch.


2. INSTALL INSTRUMENT CLUSTER FINISH PANEL SUB-ASSEMBLY
  1. Attach the 4 claws, 2 clips and 2 guides to install the instrument cluster finish panel.


3. INSTALL LOWER INSTRUMENT PANEL FINISH PANEL ASSEMBLY
  1. Connect each connector.

  1. Attach the 4 clips to install the instrument panel finish panel.


4. INSTALL INSTRUMENT PANEL FINISH PLATE GARNISH (for RHD)
  1. Connect each connector.

  1. Attach the 4 clips to install the instrument panel finish plate garnish.


5. INSTALL INSTRUMENT CLUSTER FINISH PANEL ORNAMENT (for LHD)
  1. Attach the 3 clips to install the instrument cluster finish panel ornament.


6. RESTORE AUTOAWAY/RETURN FUNCTION (for Power Tilt and Power Telescopic Steering Column)
  1. Restore the Autoaway/Return function setting to the previous condition by changing the customize parameter (Click here).

← INSPECTION (from Aug 2013)INSTALLATION (from Aug 2014) →