2013-2015 Land Cruiser Prado · Service Manual Vehicle Exterior

INSPECTION

Inspection · Vehicles built from Aug 2013


INSPECT REAR COMBINATION LIGHT ASSEMBLY LH

E198492E08
  1. Apply battery voltage to the connector and check the light illumination condition.

    OK:
    Condition
    Specified Condition
    Battery positive (+) → Terminal 1 (STP)
    Battery negative (-) → Terminal 4 (E)
    Illuminates
    Battery positive (+) → Terminal 2 (TL)
    Battery negative (-) → Terminal 4 (E)

    If the result is not as specified, replace the rear combination light assembly LH.
    Text in Illustration 
    *a
    Component without harness connected
    (Rear Combination Light Assembly LH)


INSPECT REAR COMBINATION LIGHT ASSEMBLY RH

E198492E08
  1. Apply battery voltage to the connector and check the light illumination condition.

    OK:
    Condition
    Specified Condition
    Battery positive (+) → Terminal 1 (STP)
    Battery negative (-) → Terminal 4 (E)
    Illuminates
    Battery positive (+) → Terminal 2 (TL)
    Battery negative (-) → Terminal 4 (E)

    If the result is not as specified, replace the rear combination light assembly RH.
    Text in Illustration 
    *a
    Component without harness connected
    (Rear Combination Light Assembly RH)

← DISASSEMBLY (from Aug 2013)REASSEMBLY (from Aug 2013) →