B15F8 Driver Seat ECU Vehicle Information Reading/Writing Process Malfunction
Diagnostic trouble codes · Vehicles built from Aug 2014
Versions by build date: Aug 2013 – Jul 2014 from Aug 2014
DESCRIPTION
- *1: for LHD
- *2: for RHD
- HINT:
- The front power seat switch LH*1 or RH*2 controls the front power seat control system (w/ Memory) related items that are customizable via the radio and display receiver assembly screen.
| DTC Code |
DTC Detection Condition |
Trouble Area |
| B15F8 |
Front power seat switch LH*1 or RH*2 vehicle setting processing error. |
|
INSPECTION PROCEDURE
- HINT:
- When replacing the radio and display receiver assembly, it is necessary to perform the vehicle contract setting for Connected Services (w/ Connected Services Function).
| 1. CHECK CAN COMMUNICATION SYSTEM |
Use the GTS to check if the CAN communication system is functioning normally.
- for LHD with Entry and Start System: Click here
- for LHD without Entry and Start System: Click here
- for RHD with Entry and Start System: Click here
- for RHD without Entry and Start System: Click here
- OK:
- CAN communication DTCs are not output.
Result Result
Proceed to
OK
A
NG (for LHD with Entry and Start System)
B
NG (for LHD without Entry and Start System)
C
NG (for RHD with Entry and Start System)
D
NG (for RHD without Entry and Start System)
E
- for LHD with Entry and Start System: Click here
|
|
||||
|
|
||||
|
|
||||
|
|
||||
| A | |
| 2. CHECK FRONT POWER SEAT CONTROL SYSTEM (w/ Memory) |
Check if the front power seat control system (w/ Memory) is malfunctioning (Click here).
- HINT:
- Customization may not be possible depending on the malfunction in the front power seat control system (w/ Memory).
- OK:
- No malfunctions are present in the front power seat control system (w/ Memory).
|
|
||||
| OK | |
| 3. CHECK CUSTOMIZE ITEMS |
Display the "Vehicle Customization" screen.
Make a note of the customizable items for each front power seat switch LH related system.
- HINT:
- These items shown as customizable via the audio and visual system vehicle customization screen can also be changed manually. In a following step, a manual procedure will be used.
Check the customize parameters list for the front power seat control system (w/ Memory) related items that can be customized via the radio and display receiver assembly screen (Click here).
Manually change and confirm that it was possible to successfully change the settings of the customize parameters for each system that are available for customization via the radio and display receiver assembly screen.
- OK:
- The items available for customization via the radio and display receiver assembly screen can be customized successfully using the manual procedure.
|
|
||||
| OK | ||
| ||
