REMOVAL
Removal / installation · Vehicles built from Aug 2014
Versions by build date: Aug 2013 – Jul 2014 from Aug 2014
- HINT:
- Use the same procedure for the RH and LH sides.
- The procedure listed below is for the LH side.
- Use the same procedure for the RH and LH sides.
| 1. REMOVE ROOF HEADLINING ASSEMBLY |
for 5 Door:
Remove the roof headlining assembly (Click here).
for 3 Door:
Remove the roof headlining assembly (Click here).
| 2. REMOVE VANITY LIGHT ASSEMBLY LH |
![]() ![]() |
Detach the 2 claws (A) and separate the bulb holder from the vanity light as shown in the illustration.
Detach the claw (B) and remove the vanity light.
Text in Illustration *1
Claw (A)
*2
Claw (B)
*3
Bulb Holder
| 3. REMOVE VANITY LIGHT BULB |
Remove the bulb.


