INSTALLATION
Removal / installation · Vehicles built from Aug 2013
- CAUTION:
- Wear protective gloves. Sharp areas on the parts may injure your hands.
- HINT:
- A bolt without a torque specification is shown in the standard bolt chart (Click here).
| 1. INSTALL REAR NO. 2 SEAT INNER BELT ASSEMBLY LH |
Using a T45 "TORX" socket wrench, install the inner belt assembly with the bolt.
- Torque:
- 42 N*m{ 428 kgf*cm , 31 ft.*lbf }
| 2. INSTALL REAR SEAT LOWER CUSHION HINGE COVER RH |
Attach the guide and 2 claws to install the cover.
Install the 2 screws.
| 3. INSTALL REAR NO. 2 SEAT ASSEMBLY LH |
for Manual Seat Type Seat LH Side:
Install the rear No. 2 seat assembly LH (Click here).
for Power Seat Type Seat LH Side:
Install the rear No. 2 seat assembly LH (Click here).
