REMOVAL
Removal / installation · Vehicles built from Aug 2013
- CAUTION:
- Wear protective gloves. Sharp areas on the parts may injure your hands.
- HINT:
- Use the same procedure for the RH and LH sides.
- The procedure listed below is for the LH side.
- Use the same procedure for the RH and LH sides.
| 1. REMOVE REAR NO. 2 SEAT ASSEMBLY LH |
for Manual Seat Type LH Side:
Remove the rear No. 2 seat assembly LH (Click here).
for Power Seat Type LH Side:
Remove the rear No. 2 seat assembly LH (Click here).
| 2. REMOVE REAR SEAT LOWER CUSHION HINGE COVER RH |
Remove the 2 screws.

Text in Illustration *1
Guide
Detach the 2 claws and guide and remove the cover.
| 3. REMOVE REAR NO. 2 SEAT INNER BELT ASSEMBLY LH |
![]() ![]() |
Using a T45 "TORX" socket wrench, remove the bolt and inner belt assembly.

