2013-2015 Land Cruiser Prado · Service Manual Vehicle Interior

C1A01 Driving Support ECU

Diagnostic trouble codes · Vehicles built from Aug 2013

DESCRIPTION

The driving support ECU uses the millimeter wave radar sensor assembly to detect obstacles in front of the vehicle. Based on this information, the driving support ECU calculates the risk of a collision and operates the pre-crash safety system when it determines that the risk is high.
DTC Code
DTC Detection Condition
Trouble Area
C1A01
While the initial check is running, the ignition switch is ON and the pre-crash safety system is operating, the driving support ECU detects an internal malfunction for 1 second.
Driving support ECU

INSPECTION PROCEDURE


1. CHECK FOR DTC
  1. Clear the DTCs (Click here).

  1. Check for DTCs (Click here).

    OK:
    DTC C1A01 is not output.



NG
REPLACE DRIVING SUPPORT ECU (Click here)
OK

USE SIMULATION METHOD TO CHECK (Click here)


← B2090 Driving Support System Malfunction (from Aug 2014)C1A02 Vehicle Information Not Obtained (from Aug 2013) →