When the idle up switch is pushed, the air conditioning amplifier assembly outputs the engine idle up signal. If engine idle up does not occur when the idle up switch is pushed, there may be a problem in the circuit shown below.
WIRING DIAGRAM
INSPECTION PROCEDURE
1. READ VALUE USING INTELLIGENT TESTER (IDLE UP SWITCH)
Use the Data List to check if the idle up switch is functioning properly (Click here).
Air Conditioner
Tester Display
Measurement Item/Range
Normal Condition
Diagnostic Note
IDLE UP/PWR HEAT Switch
Idle up switch / ON or OFF
ON: Idle up switch on OFF: Idle up switch off
-
OK:
The display is as specified in the normal condition column.