2013-2015 Land Cruiser Prado · Service Manual Drivetrain

REMOVAL

Removal / installation · Vehicles built from Aug 2014

Versions by build date: Aug 2013 – Jul 2014 from Aug 2014


1. REMOVE REAR CONSOLE BOX ASSEMBLY
(Click here)

2. REMOVE TRANSMISSION CONTROL CABLE ASSEMBLY
  1. Move the shift lever to N.

  1. C214423
    Disconnect the transmission control cable end from the shift lever.

  1. C214430
    Rotate the socket counterclockwise approximately 180° and, while holding the nut in that position, disconnect the transmission control cable from the shift lever retainer.

    NOTICE:
    Do not over-rotate the nut as it will come off the internal spring and the transmission control cable will not be reusable.

  1. C214587
    Remove the nut and clip, and disconnect the transmission control cable assembly from the automatic transmission.

  1. C214918
    Remove the 2 nuts and disconnect the ground cable and transmission control cable support.

  1. C214919
    Remove the 2 nuts and detach the 3 claws, and then pull out the transmission control cable.

← REMOVAL (Aug 2013 – Jul 2014)INSTALLATION (Aug 2013 – Jul 2014) →