2013-2015 Land Cruiser Prado · Service Manual Vehicle Interior

REASSEMBLY

Removal / installation · Vehicles built from Aug 2013

CAUTION:
Wear protective gloves. Sharp areas on the parts may injure your hands.

HINT:
  1. Use the same procedure for the RH and LH sides.
  2. The procedure listed below is for the LH side.


1. INSTALL REAR SIDE SEATBACK FRAME SUB-ASSEMBLY LH
  1. Install the seatback frame and 2 bushes.

  1. Install the 2 bolts.

    Torque:
    18 N*m{ 184 kgf*cm , 13 ft.*lbf }


2. INSTALL REAR SIDE SEAT BAND SUB-ASSEMBLY
  1. Install the seat band with the screw.


3. INSTALL REAR SIDE SEATBACK COVER SUB-ASSEMBLY LH
  1. Install the seatback cover to the seatback pad.


4. INSTALL SEATBACK COVER WITH PAD

  1. B243064E01
    Using hog ring pliers, install the seatback cover with pad to the seatback frame with new hog rings.
    Text in Illustration 
    *1
    Hog Ring Pliers

    NOTICE:
    1. Be careful not to damage the cover.
    2. When installing the hog rings, avoid wrinkling the cover.


5. INSTALL REAR SIDE SEAT CUSHION COVER SUB-ASSEMBLY LH
  1. Install the seat cushion cover to the seat cushion pad.


6. INSTALL SEAT CUSHION COVER WITH PAD

  1. B243065E01
    Using hog ring pliers, install the seat cushion cover with pad to the seat cushion frame with new hog rings.
    Text in Illustration 
    *1
    Hog Ring Pliers

    NOTICE:
    1. Be careful not to damage the cover.
    2. When installing the hog rings, avoid wrinkling the cover.

  1. Close the 2 fasteners.


7. INSTALL NO. 1 REAR SIDE SEAT CUSHION LEG SUB-ASSEMBLY LH
  1. Install the spring to the seat cushion leg.

  1. Install the seat cushion leg and 2 spacers.

  1. Install the 2 pins and 2 washers.

  1. Install 2 new E-rings.


8. INSTALL NO. 2 REAR SEAT LEG BRACKET COVER
  1. Attach the claw to install the cover.


9. INSTALL NO. 1 REAR SEAT LEG BRACKET COVER
  1. Attach the guide to install the cover.

  1. Install the screw.

← DISASSEMBLY (from Aug 2013)INSTALLATION (from Aug 2013) →