2013-2015 Land Cruiser Prado · Service Manual Vehicle Exterior

DISASSEMBLY

Removal / installation · Vehicles built from Aug 2013


1. REMOVE LICENSE PLATE LIGHT CORD (w/o Entry and Start System)
  1. Disconnect the connector and remove the license plate light cord.


2. REMOVE LICENSE PLATE LIGHT ASSEMBLY

  1. E282722
    Remove the 4 screws.

  1. E282723
    Detach the 2 guides and remove the license plate light assembly.


3. REMOVE NO. 1 BACK DOOR GARNISH RETAINER

B357967
  1. Remove the 3 screws and No. 1 back door garnish retainer.


4. REMOVE BACK DOOR ELECTRICAL KEY SWITCH (w/ Entry and Start System)

  1. B241159
    Remove the 2 screws.

  1. Detach the 2 guides and remove the back door electrical key switch.


5. REMOVE BACK DOOR OUTSIDE GARNISH PROTECTOR (for Lower Side)

B353297E01
  1. Remove the back door outside garnish protector.

    Text in Illustration 
    *1
    Back Door Outside Garnish Protector


6. REMOVE BACK DOOR OUTSIDE GARNISH PROTECTOR (for Upper Side)

B353296E01
  1. Remove the back door outside garnish protector.

    Text in Illustration 
    *1
    Back Door Outside Garnish Protector

← REMOVAL (from Aug 2014)REASSEMBLY (from Aug 2013) →