2013-2015 Land Cruiser Prado · Service Manual Vehicle Interior

INSTALLATION

Removal / installation · Vehicles built Aug 2013 – Jul 2014

Versions by build date: Aug 2013 – Jul 2014 from Aug 2014

CAUTION:
Wear protective gloves. Sharp areas on the parts may injure your hands.


1. INSTALL REAR CENTER SEAT INNER BELT ASSEMBLY
  1. Install the inner belt with bolt.

    Torque:
    42 N*m{ 428 kgf*cm , 31 ft.*lbf }

  1. Install the band.


2. INSTALL REAR SEATBACK ASSEMBLY RH

B238041E01
  1. Fold down the seatback, set the seatback positioning wire on the hinge, and then temporarily install the bolt to the hinge.

    Text in Illustration 
    *1
    Positioning Wire

    NOTICE:
    Be careful not to damage the vehicle body.

  1. Restore the seatback to the upright position and temporarily install the seatback with the 2 bolts.

  1. Tighten the bolts in the order indicated in the illustration.

    Torque:
    37 N*m{ 377 kgf*cm , 27 ft.*lbf }

  1. Attach the 2 claws and connect the outer belt with the bolt.

    Torque:
    42 N*m{ 428 kgf*cm , 31 ft.*lbf }


3. INSTALL REAR SEATBACK BOARD CARPET ASSEMBLY RH
  1. Attach the 2 claws and 5 clips to install the carpet.


4. INSTALL REAR SEATBACK COVER
  1. Attach the 4 claws to install the cover.

  1. Restore the seatback to the upright position and lock it.


5. INSTALL REAR SEAT HEADREST ASSEMBLY
  1. Install the headrest.

← REMOVAL (from Aug 2014)INSTALLATION (from Aug 2014) →