2013-2015 Land Cruiser Prado · Service Manual Vehicle Interior

REMOVAL

Removal / installation · Vehicles built from Aug 2014

Versions by build date: Aug 2013 – Jul 2014 from Aug 2014

CAUTION:
Wear protective gloves. Sharp areas on the parts may injure your hands.


1. REMOVE REAR SEAT HEADREST ASSEMBLY
  1. Remove the headrest.


2. REMOVE REAR SEATBACK COVER
  1. Press the seatback lock release button to release the lock and fold down the seatback.

  1. B237641
    Using a screwdriver, detach the 4 claws and remove the cover.

    HINT:
    Tape the screwdriver tip before use.


3. REMOVE REAR SEATBACK BOARD CARPET ASSEMBLY RH

B238017
  1. Using a clip remover, detach the 5 clips.

  1. Detach the 2 claws and remove the carpet.


4. REMOVE REAR SEATBACK ASSEMBLY RH

B238088
  1. Remove the bolt and detach the 2 claws, and then disconnect the outer belt.

  1. Remove the 2 bolts that secure the seatback to the floor.

  1. Fold down the seatback, remove the bolt from the hinge, and then remove the seatback.

    NOTICE:
    Be careful not to damage the vehicle body.


5. REMOVE REAR CENTER SEAT INNER BELT ASSEMBLY

B241736E02
  1. Detach the fastening tape and remove the band.

  1. Remove the bolt and inner belt.

    Text in Illustration 
    *1
    Band

← REMOVAL (Aug 2013 – Jul 2014)INSTALLATION (Aug 2013 – Jul 2014) →