INSTALLATION
Removal / installation · Vehicles built from Aug 2014
Versions by build date: Aug 2013 – Jul 2014 from Aug 2014
| 1. INSTALL INDOOR NO. 3 ELECTRICAL KEY ANTENNA ASSEMBLY |
Attach the 2 claws to install the indoor No. 3 electrical key antenna assembly.
Connect the connector.
| 2. INSTALL REAR FLOOR CARPET ASSEMBLY (w/o Rear No. 2 Seat, for 5 Door) |
Attach the 4 claws to install the rear floor carpet.


Text in Illustration *A
w/o Deck Rail
*B
w/ Deck Rail
*C
for Face to Face Seat Type
-
-
| 3. INSTALL FLOOR SIDE RAIL LH (w/ Deck Rail, for 5 Door) |
Install the floor side rail with the 3 bolts.
| 4. INSTALL FLOOR SIDE RAIL RH (w/ Deck Rail, for 5 Door) |
- HINT:
- Use the same procedure described for the LH side.
| 5. INSTALL REAR FLOOR MAT REAR SUPPORT PLATE (w/o Rear No. 2 Seat, for 5 Door) |
Attach the 5 clips and 4 claws to install the rear floor mat rear support plate.
| 6. INSTALL NO. 1 DECK BOARD SUB-ASSEMBLY (w/o Rear No. 2 Seat, for 5 Door) |
Attach the clip to install the No. 1 deck board.
| 7. INSTALL FRONT LUGGAGE COMPARTMENT TRIM COVER (w/o Rear No. 2 Seat, for 5 Door) |
![]() ![]() |
- HINT:
- Use the same procedure for the other front luggage compartment trim cover.
Install the luggage hold belt striker and front luggage compartment trim cover with the bolt.
Text in Illustration *1
Luggage Hold Belt Striker
Attach the 4 claws to install the cap.
| 8. INSTALL TONNEAU COVER ASSEMBLY (w/ Rear No. 2 Seat, for 5 Door) |
Install the tonneau cover.
| 9. INSTALL REAR NO. 2 SEAT ASSEMBLY (w/ Rear No. 2 Seat, for 5 Door) |
for Manual Seat Type:
Install the rear No. 2 seat assembly (Click here).
for Power Seat Type:
Install the rear No. 2 seat assembly (Click here).
for Face to Face Seat Type:
Install the rear No. 2 seat assembly (Click here).
| 10. INSTALL REAR FLOOR CARPET ASSEMBLY (for 3 Door) |
Install the rear floor carpet.
| 11. INSTALL REAR FLOOR MAT REAR SUPPORT PLATE (for 3 Door) |
Attach the 6 claws to install the rear floor mat rear support plate.
Install the 5 screws.
| 12. INSTALL MAT SET PLATE COVER (for 3 Door) |
- HINT:
- Use the same procedure for all mat set plate covers.
Attach the 2 claws to install the mat set plate cover.
| 13. INSTALL TONNEAU COVER ASSEMBLY (w/ Tonneau Cover, for 3 Door) |
Install the tonneau cover.

