2013-2015 Land Cruiser Prado · Service Manual Vehicle Exterior

ADJUSTMENT

Removal / installation · Vehicles built from Aug 2013


1. INSPECT BACK DOOR GLASS

B242864E01
  1. Check that the clearance measurements of the areas labeled A are within the standard range.

    Standard Clearance :
    Area
    Measurement
    A
    5.05 to 8.05 mm (0.199 to 0.317 in.)


2. ADJUST BACK DOOR GLASS

B241687
  1. Using a T30 "TORX" wrench, loosen the bolts on the hinge and adjust the position of the back door glass.

  1. Using a T30 "TORX" wrench, tighten the hinge bolts on the body after the adjustment.

  1. B242875
    Adjust the striker position by slightly loosening the striker mounting nuts.

  1. Tighten the striker mounting nuts after the adjustment.

← REMOVAL (from Aug 2013)INSTALLATION (from Aug 2013) →