This circuit includes the parking brake switch assembly and navigation receiver assembly.
WIRING DIAGRAM
INSPECTION PROCEDURE
HINT:
When replacing the navigation receiver assembly, it is necessary to perform the vehicle contract setting for Connected Services (w/ Connected Services Function).
1. CHECK VEHICLE SIGNAL (OPERATION CHECK)
Display the "Vehicle Signal Check Mode" screen (Click here).
Check that the display changes between ON and OFF according to the parking brake operation.
OK:
Parking Brake Condition
Display
Applied
ON
Released
OFF
HINT:
This display is updated once per second. As a result, it is normal for the display to lag behind the actual parking brake operation.