22204
1.CHECK INTAKE MASS AIR FLOW METER SUB-ASSEMBLY
Check the mass air flow value.
Connect the GTS to the DLC3.
Turn the ignition switch to ON.
Turn the GTS on.
Enter the following menus: Powertrain / Engine / Data List / All Data / MAF.
Blow air into the intake mass air flow meter sub-assembly and check that the mass air flow meter value fluctuates.
|
Air |
If the result is not as specified, check the intake mass air flow meter sub-assembly (See page Engine / Hybrid System>2TR-FE (ENGINE CONTROL)>MASS AIR FLOW METER>INSPECTION), or wiring and ECM (See page Engine / Hybrid System>2TR-FE (ENGINE CONTROL)>SFI SYSTEM>P0102).