Home › Engine / Hybrid System › 5L-E (ENGINE CONTROL) › DIESEL THROTTLE BODY
RM27T0E _51 Engine / Hybrid System _053658 5L-E ENGINE CONTROL _0260437 DIESEL THROTTLE BODY A

5L-E ENGINE CONTROL  DIESEL THROTTLE BODY  REMOVAL  


PROCEDURE

Hide 17705 1.REMOVE RESONATOR WITH AIR CLEANER CAP SUB-ASSEMBLY

Hide 17130 2.REMOVE INTAKE PIPE

a.
A223437

Remove the 2 bolts.


b.

Loosen the hose clamp and remove the intake pipe.


Hide 17114A 3.REMOVE INTAKE FLANGE

a.
A223438E01
0.079,0.028 0.281,0.207 0.202,0.179 10 *A 0.079,2.392 0.281,2.571 0.202,0.179 10 *B

Remove the bolt and disconnect the heater water hose.

Text in Illustration
*A w/o Rear Heater
*B w/ Rear Heater


b.
A223439

Disconnect the manifold absolute pressure sensor connector.


c.
A223440

Disconnect the PCV hose.


d.

Remove the 3 nuts, intake flange and gasket.


Hide 26100 4.REMOVE DIESEL THROTTLE BODY

a.
A223441

Disconnect the throttle open switch connector.


b.

Disconnect the throttle control motor connector.


c.

Remove the diesel throttle body and gasket.