Home › Engine / Hybrid System › 5L-E (INTAKE / EXHAUST) › EXHAUST MANIFOLD
RM27T0E _51 Engine / Hybrid System _053677 5L-E INTAKE / EXHAUST _0260639 EXHAUST MANIFOLD A

5L-E INTAKE / EXHAUST  EXHAUST MANIFOLD  REMOVAL  


PROCEDURE

Hide 53736B 2.REMOVE FRONT NO. 1 FENDER APRON TO FRAME SEAL RH

Hide 3.REMOVE RESONATOR WITH AIR CLEANER CAP SUB-ASSEMBLY

a.
A224304

Disconnect the sensor connector.


b.

Detach the wire harness clamp.


c.

Loosen the hose clamp and remove the resonator with air cleaner cap.


d.
A226728

Detach the 4 hook clamps, and then remove the air cleaner cap and resonator with air cleaner cap.


Hide 17410 5.REMOVE FRONT EXHAUST PIPE ASSEMBLY

Hide 15301 6.REMOVE ENGINE OIL LEVEL DIPSTICK

a.

Remove the oil level dipstick.


Hide 11452 7.REMOVE ENGINE OIL LEVEL DIPSTICK GUIDE

a.

Remove the 2 bolts, guide and O-ring.


Hide 17167 8.REMOVE NO. 1 EXHAUST MANIFOLD HEAT INSULATOR

a.
A222728

Remove the 3 bolts and insulator.


Hide 17141 9.REMOVE EXHAUST MANIFOLD

a.
A222729

Remove the 2 nuts, 6 bolts and manifold.


b.

Remove the gasket.