Home › Engine / Hybrid System › 1KD-FTV (ENGINE CONTROL) › ECM › 2015.06–2020.08
RM27T0E _51 Engine / Hybrid System _053659 1KD-FTV ENGINE CONTROL _0260447 ECM A

1KD-FTV ENGINE CONTROL  ECM  INSTALLATION  


PROCEDURE

Hide 89668A 1.INSTALL NO. 2 ECM BRACKET

a.

Install the No. 2 ECM bracket with the 2 screws.

Torque:
3.0 N*m (31 kgf*cm, 27 in.*lbf)


Hide 89667A 2.INSTALL NO. 1 ECM BRACKET

a.

Install the No. 1 ECM bracket with the 2 screws.

Torque:
3.0 N*m (31 kgf*cm, 27 in.*lbf)


Hide 89661A 3.INSTALL ECM

a.

Install the ECM with the bolt and nut.

Torque:
8.0 N*m (82 kgf*cm, 71 in.*lbf)


b.

Connect the 6 connectors.


Hide 55550 4.INSTALL GLOVE COMPARTMENT DOOR ASSEMBLY

Hide 5.PERFORM REGISTRATION

a.

Perform registration (See page Engine / Hybrid System>1KD-FTV (ENGINE CONTROL)>ECD SYSTEM>REGISTRATION).

HINT:

Only perform registration when the ECM is replaced, either by itself or in any of the following combinations.

·

ECM and Fuel Supply Pump

·

ECM and Diesel Throttle Body Assembly

·

ECM and Injector Assembly

·

ECM and Engine Assembly




Hide 6.START ENGINE

a.

When replacing the ECM, start the engine to initialize the new ECM (See page Engine / Hybrid System>1KD-FTV (ENGINE CONTROL)>ECD SYSTEM>INITIALIZATION).