Home › Engine / Hybrid System › 1KD-FTV (ENGINE MECHANICAL) › FRONT CRANKSHAFT OIL SEAL › 2015.06–2020.08
RM27T0E _51 Engine / Hybrid System _053664 1KD-FTV ENGINE MECHANICAL _0260514 FRONT CRANKSHAFT OIL SEAL A

1KD-FTV ENGINE MECHANICAL  FRONT CRANKSHAFT OIL SEAL  INSTALLATION  


PROCEDURE

Hide 11301C 1.INSTALL FRONT CRANKSHAFT OIL SEAL

a.

Apply MP grease to the lip of a new crankshaft oil seal.

NOTICE:

Keep the lip free of foreign objects.



b.
A225344E01
0.145,0.4 0.462,0.561 0.316,0.161 10 SST 1.126,1.009 0.593,0.48 0.593,0.48 0.514,0.48 false

Using SST and a hammer, tap in the crankshaft oil seal until its surface is flush with the timing gear cover edge.

SST
09214-76011  

NOTICE:
·

Do not tap the oil seal at an angle.

·

Wipe off extra grease on the crankshaft.




Hide 13471 2.INSTALL CRANKSHAFT PULLEY

a.

Align the keyway of the pulley with the key located on the crankshaft, and then slide the pulley into place to install it.


b.
A225341E01
1.729,0.781 2.135,0.344 2.135,0.344 2.229,0.344 true 1.198,1.854 0.615,1.854 true 2.281,0.24 2.583,0.406 0.302,0.167 10 false SST 0.281,1.771 0.583,1.938 0.302,0.167 10 false SST

Using SST, install the pulley bolt.

SST
09213-58014  
09330-00021  

Torque:
365 N*m (3722 kgf*cm, 269 ft.*lbf)


Hide 51405A 7.INSTALL NO. 1 ENGINE UNDER COVER SUB-ASSEMBLY