25681
1.INSTALL NO. 1 EGR COOLER
Install a new gasket and the No. 1 EGR cooler to the No. 2 EGR valve assembly with electric EGR control valve assembly with the 4 bolts.
2.INSTALL NO. 1 EGR COOLER AND NO. 2 EGR VALVE ASSEMBLY WITH ELECTRIC EGR CONTROL VALVE ASSEMBLY
Temporarily install a new gasket and the No. 1 EGR cooler and No. 2 EGR valve assembly with electric EGR control valve assembly to the intake manifold with the 4 bolts.
Using an E8 "TORX" socket wrench, install the 2 stud bolts to the No. 2 EGR valve assembly.
Tighten the 4 bolts in the order shown in the illustration.
Make sure to tighten the bolts in the order.
25804
3.INSTALL VACUUM CONTROL VALVE SET
25601
4.CONNECT NO. 1 EGR PIPE SUB-ASSEMBLY
16209
5.CONNECT NO. 4 WATER BY-PASS PIPE SUB-ASSEMBLY
16206B
6.INSTALL NO. 3 WATER BY-PASS PIPE SUB-ASSEMBLY
Install the No. 3 water by-pass pipe sub-assembly to the No. 1 EGR cooler with the 2 bolts.
Connect the No. 9 water by-pass hose to the electric EGR control valve assembly, and slide the clamp to secure the hose.
Connect the No. 8 water by-pass hose to the No. 3 water by-pass pipe sub-assembly, and slide the clamp to secure the hose.
Connect the No. 4 fuel hose to the No. 3 water by-pass pipe sub-assembly.
25612
7.INSTALL NO. 2 EGR PIPE
25625
8.INSTALL EGR VALVE BRACKET
82121
9.CONNECT ENGINE WIRE
44306
10.CONNECT VANE PUMP OIL RESERVOIR SUB-ASSEMBLY
77820
11.CONNECT UREA TANK FILLER PIPE ASSEMBLY (w/ Urea SCR System)
12632
12.INSTALL NO. 2 ENGINE COVER BRACKET
12633
13.INSTALL NO. 3 ENGINE COVER BRACKET
89421C
14.INSTALL DIESEL TURBO PRESSURE SENSOR
23265C
15.INSTALL GAS FILTER
16278
16.INSTALL NO. 2 WATER BY-PASS PIPE
87209
17.INSTALL WATER HOSE SUB-ASSEMBLY
26100G
18.INSTALL DIESEL THROTTLE BODY ASSEMBLY
19.ADD ENGINE COOLANT
20.INSPECT FOR COOLANT LEAK