16331A
1.INSTALL THERMOSTAT
Install a new gasket to the thermostat.
Install the thermostat with the jiggle valve upward.
The jiggle valve may be set within 10° to either side of the prescribed position.
16321
2.INSTALL WATER INLET
Install a new gasket and the water inlet to the timing chain cover sub-assembly with the bolt and 2 nuts.
16572D
3.CONNECT NO. 2 RADIATOR HOSE
Connect the No. 2 radiator hose to the water inlet, and slide the hose clamp to secure the hose.
44310
4.CONNECT VANE PUMP ASSEMBLY
16361A
5.INSTALL FAN AND GENERATOR V BELT
6.ADD ENGINE COOLANT
7.INSPECT FOR COOLANT LEAK
51405A
8.INSTALL NO. 1 ENGINE UNDER COVER SUB-ASSEMBLY
52129B
9.INSTALL FRONT BUMPER COVER LOWER
53292A
10.INSTALL UPPER RADIATOR SUPPORT SEAL